HK416N (barrel dimensions and markings)

Diskutér ekte våpen.
User avatar
Slappy
Sometimes here
Sometimes here
Posts: 54
Joined: 18 Jul 2010, 17:54
Location: Germany
Contact:

HK416N (barrel dimensions and markings)

Postby Slappy » 24 Oct 2010, 16:56

Hi,
I’m from Germany and going to build an HK416N (VFC HK416 basis) for my norwegian-kit.
So excuse me for writing in English.
If I posted in the wrong board-categorie, please excuse me, I wasn't sure.



It would be great if you can help me with this:

I need the exact dimensions of the barrel, for producing an outerbarrel-extension.
This dimensions and the outer-diameter of the barrel.

Image

(Z is the distance from the gasblock to the small groove/notch which goes around the barrel)


I also need good hires pictures of all markings to create a data to laser engrave the markings.
Especially from these:
Image

Good pictures from the gasblock (with and without RAS) would also be great :wink:

Thank you very much!
Greets
Daniel
Last edited by Slappy on 05 Nov 2010, 11:03, edited 2 times in total.

User avatar
Klingz
Power User
Power User
Posts: 3373
Joined: 24 May 2005, 21:13
Location: Strand i Rogaland.

Re: HK416N (barrel dimensions and markings)

Postby Klingz » 24 Oct 2010, 20:51


User avatar
Slappy
Sometimes here
Sometimes here
Posts: 54
Joined: 18 Jul 2010, 17:54
Location: Germany
Contact:

Re: HK416N (barrel dimensions and markings)

Postby Slappy » 29 Oct 2010, 15:29

Thanks :wink:


I still need the other dimensions and hires pictures of the markings!
Espacially from the "bajonettfeste", diameter, length etc.

It would be very nice, and in return I will publish the CAD-data and the datas for the laserengraving here if you want it.
And write a little guide for rebuilding the HK416N-gasblock :wink:

User avatar
Slappy
Sometimes here
Sometimes here
Posts: 54
Joined: 18 Jul 2010, 17:54
Location: Germany
Contact:

Re: HK416N (barrel dimensions and markings)

Postby Slappy » 26 Nov 2010, 07:11

Sorry for the doublepost.

I've found this picture, but the qualitiy is not good enough to create a good vector-data for the laserengraving.
Can anyone make a better picture? Hires with a DSLR would be perfect :wink:

Also I need still the exact dimensions of the bajonettfeste for creating the CAD-Data.
Please help me :mrgreen:

User avatar
Devil
Power User
Power User
Posts: 4511
Joined: 02 Nov 2003, 14:15
Location: vestland

Re: HK416N (barrel dimensions and markings)

Postby Devil » 15 Jan 2011, 00:19

sounds like you are serious about this project, thats nice :D
If you manage to make some good barrel fronts I would be very interessted in buying one :wink:
!!!♥
At 3:30 p.m. EST, a 28-man Navy Seals squadron raided a compound in Abbottabad, Pakistan, killing the Al Qaeda leader with a bullet to the head. Thank you seal team-6!
http://www.youtube.com/watch?v=qwTh3Or0 ... re=related

User avatar
Slappy
Sometimes here
Sometimes here
Posts: 54
Joined: 18 Jul 2010, 17:54
Location: Germany
Contact:

Re: HK416N (barrel dimensions and markings)

Postby Slappy » 23 Jan 2011, 19:39

Yep, very serious :wink:
I just wait to get enough informations to start.


Make a few more should be possible, just have to talk to my boss first about the using of the machines and material for more than one.
I'm study technical system designing/engineering, the stuff will be produced at the company I work.


The CAD-Data for the barrel extension is nearly finished, just need the "real" dimensions for the bajonettfeste, the dimensions I used are from pixels-counting and I want it as accurately as possible.
I'm planing also a Flashhider, but again I haven't enough informations... :mrgreen:

User avatar
Slappy
Sometimes here
Sometimes here
Posts: 54
Joined: 18 Jul 2010, 17:54
Location: Germany
Contact:

Re: HK416N (barrel dimensions and markings)

Postby Slappy » 24 Feb 2011, 16:41

Nobody with a HK416N at home who can give me the missing dimensions? :(
I would be very thankfull if someone could give me these measures:

Image

Just need these to start with the building of the prototype.
The CAD is waiting to get feed with the real dimensions :wink:

Image

User avatar
Gizmo
Regular User
Regular User
Posts: 328
Joined: 27 Sep 2009, 13:20
Location: Ski

Re: HK416N (barrel dimensions and markings)

Postby Gizmo » 24 Feb 2011, 16:50

Wish I was able to help you out, but i returned my 416 in july.

I'll try to get you the measures, just have to call a friend and see what he can do ;)

Will get back to you when I have talked to him.

User avatar
ops
Moderator
Moderator
Posts: 1851
Joined: 07 May 2004, 12:32
Location: Kleppestø, Askøy

Re: HK416N (barrel dimensions and markings)

Postby ops » 24 Feb 2011, 19:25

I`ll se what I can fix for you during the weekend.
!!! T-1
"Hey reporter - if you lie with your cock against the ground as a tank goes by it feels fucking GREAT"

User avatar
Gizmo
Regular User
Regular User
Posts: 328
Joined: 27 Sep 2009, 13:20
Location: Ski

Re: HK416N (barrel dimensions and markings)

Postby Gizmo » 25 Feb 2011, 18:28

ErlEks wrote:Is it something like this you are looking for ?
*bilde*


Han har jo forklart med bilde over hvilke dimensjoner han er ute etter, så nei.

User avatar
Talisman
Often here
Often here
Posts: 162
Joined: 20 Apr 2009, 14:12
Location: Vestfold
Contact:

Re: HK416N (barrel dimensions and markings)

Postby Talisman » 01 Mar 2011, 12:40

Ill see if I can find my skyvelære somewhere, and I'll messaure it up for you.
"Tracers work both ways"

User avatar
Klingz
Power User
Power User
Posts: 3373
Joined: 24 May 2005, 21:13
Location: Strand i Rogaland.

Re: HK416N (barrel dimensions and markings)

Postby Klingz » 01 Mar 2011, 18:47

Talisman wrote:Ill see if I can find my skyvelære somewhere, and I'll messaure it up for you.


Caliper, engelsk for skyvelær :wink:

User avatar
Slappy
Sometimes here
Sometimes here
Posts: 54
Joined: 18 Jul 2010, 17:54
Location: Germany
Contact:

Re: HK416N (barrel dimensions and markings)

Postby Slappy » 08 Mar 2011, 19:49

Thanks guys.
The user UfLaX send me the missing dimensions and a lot of pictures, thanks again to UfLaX :wink:

I'm finish now with the CAD, tomorow I will control it together with my instructor/boss and make it ready for production.
I talked to him also a few days ago, about producing a few more etc.
He said its no problem if the material is payed, but it could take a while.
I let you know when everything is ready and more than one prototype can be build :wink:


Edit@5th May:
After a long break with much work and no time, I can continue the HK416N projekt :wink:
CAD is ready (Picture) and the prototype is build within the next weeks.
Painting is also planned, I'll looking for companys/gunsmiths in Germany who will paint it.
Not spraying it with paint, surface treatment which color the surface in black/grey.
Used by real firearms, but I don't know the english word for it :mrgreen:
Last edited by Slappy on 05 May 2011, 18:07, edited 1 time in total.

User avatar
Gizmo
Regular User
Regular User
Posts: 328
Joined: 27 Sep 2009, 13:20
Location: Ski

Re: HK416N (barrel dimensions and markings)

Postby Gizmo » 09 Mar 2011, 20:01

Slappy wrote:Thanks guys.
The user UfLaX send me the missing dimensions and a lot of pictures, thanks again to UfLaX :wink:

I'm finish now with the CAD, tomorow I will control it together with my instructor/boss and make it ready for production.
I talked to him also a few days ago, about producing a few more etc.
He said its no problem if the material is payed, but it could take a while.
I let you know when everything is ready and more than one prototype can be build :wink:


Good to see you finally got the dimensions you needed. Very cool! Looking forward to see this project finished :)


Return to “Real Steel”

Who is online

Users browsing this forum: No registered users and 1 guest

cron